機構擒牛神器選股指標公式分享:股市中操作龍頭股是最快的盈利模式,也是最能規避風險的模式。但是龍頭股通常漲勢兇猛,大幅追漲或許并不是好的對策,而是要等待它回調的時機買入,這就是“龍回頭”戰法的精髓所在。所謂“龍回頭”指主力資金在大幅拉升股票后由于短期獲利資金豐厚,股票拋壓盤很重,需要通過打壓股價達到洗盤效果,為繼續拉升股價做準備。強勢股出現“龍回頭”的原因是由于大盤的大幅下跌,這類強勢股的可操作性會很好(主力資金未能及時出逃),往往會出現一個絕佳的買點。本套龍回頭指標出信號后尾盤買入,“龍回頭”買入后未獲利,還有機會等“二次買”信號出現再買,為你做到穩定盈利。
原創指標無未來函數,信號不漂移
強龍回頭指標操作技術要點說明:
1、第一波大幅拉升的股票回調后出現“龍回頭”的信號最佳,多波上漲后出現的要差些。
2、“龍回頭”形態的票最好是股價出現強支撐的并且是出現明顯縮量或股價走勢遲鈍的為佳。
3、“龍回頭”信號要尾盤買,盤中出信號后到尾盤信號消失的不操作。
4、 高位出現“龍回頭”的要回避,如波段漲幅過高的或先續出現多個一字板后+巨陰線形態的票。
5、“龍回頭”信號尾盤買,次日看獲利情況高拋,自己可以定2%以上止盈。如果未獲利可以等“二次尾買”''8590.信號出現再次尾盤買入。
{公式名稱: 古道龍回頭
公式描述: 捕獲底部第二(龍回頭)、第三次(再回頭)漲停的買入點
參數數量: 4
參數1: 兩頭最大間距數, 最小: 5, 最大: 60, 缺省: 15
參數2: 龍抬頭開關, 最小: 0, 最大: 1, 缺省: 0
參數3: 龍回頭開關, 最小: 0, 最大: 1, 缺省: 1
參數4: 再回頭開關, 最小: 0, 最大: 1, 缺省: 1
公式類型: 技術指標公式-其他類型
畫線方法: 副圖
公式版本: 0
顯示小數: 固定0位
坐標線位置: 自動
額外Y軸分界: 無
參數精靈:
請設置計算參數:
兩頭最大間距數: Param#0 (5.00--60.00)
龍抬頭開關: Param#1 (0.00--1.00)
龍回頭開關: Param#2 (0.00--1.00)
再回頭開關: Param#3 (0.00--1.00)
用法注釋:無
公式源碼:}
VAR1:=0.1;
VAR2:=AMOUNT/(VOL*100);
VAR3:=(CLOSE-REF(CLOSE,1))*100/REF(CLOSE,1);
VAR4:=(VAR2-REF(CLOSE,1))*100/REF(CLOSE,1);
VAR5:=(HIGH-LOW)*100/REF(CLOSE,1);
VAR6:=INTPART(REF(CLOSE,1)*(1+VAR1)*100)/100;
VAR7:=CLOSE>=VAR6;
VAR8:=CLOSE>=VAR6 AND LOW<HIGH;
VAR9:=HIGH>=VAR6;
VAR10:=LLV(LOW,3)<MA(COST(10),3);
VAR11:=LLV(LOW,3)<MA(COST(5),3);
VAR12:=VAR9 AND NOT(REF(VAR9,1)) AND VAR11;
VAR13:=BARSLAST(REF(VAR12,1))+1;
VAR14:=REF(HIGH,VAR13);
VAR15:=REF(LOW,VAR13);
VAR16:=HHV(HIGH,VAR13);
VAR17:=(VAR16-VAR14)*100/VAR14;
VAR18:=VAR7 AND (VAR4>4.18 OR (VAR11 AND VAR4>2.18*10/VAR5)) AND NOT(REF(VAR9,1)) AND VAR10;
VAR19:=EXIST(REF(VAR12,1),兩頭最大間距數) AND VAR16>0.99*VAR14 AND VAR18 AND CLOSE>VAR15*0.85 AND CLOSE<VAR14*1.1 AND REF(VAR17,1)<30 AND REF(VAR17,1)>(-30);
龍抬頭:0.2*(龍抬頭開關 AND VAR12),COLORBROWN;
龍回頭:龍回頭開關 AND NOT(EXIST(REF(VAR19,1),兩頭最大間距數)) AND VAR19,COLORRED;
再回頭:再回頭開關 AND EXIST(REF(VAR19,1),兩頭最大間距數) AND VAR19,COLORMAGENTA;
{公式名稱: 強龍回頭
公式描述:
無參數
公式類型: 條件選股公式-其他類型
公式版本: 0
參數精靈:無
用法注釋:無
公式源碼:}
X_1:=CLOSE>4 AND CLOSE<35 AND HHV(HIGH,60)/LLV(LOW,60)<3;
X_2:=NAMELIKE(3) OR NAMELIKE(4);
X_3:=TOTALBARSCOUNT>10;
X_4:=X_1 AND X_3 AND NOT(X_2);
X_5:=BETWEEN(HHVBARS(HIGH,29),4,9);
X_6:=X_4 AND X_5;
X_7:=BARSLAST(X_6=1);
X_8:=CROSS(MA(CLOSE,5),REF(HIGH,X_7)) AND X_7<4 AND CLOSE>REF(OPEN,1) AND LOW>REF(LOW,1) AND CLOSE>OPEN AND MA(CLOSE,10)>REF(MA(CLOSE,10),1) AND OPEN<REF(OPEN,4);
X_9:=(OPEN+HIGH+LOW)/3;
X_10:=EMA(X_9,55);
X_11:=EMA(X_9,7);
強龍回頭:OPEN<X_10 AND X_11>X_10 AND CLOSE>=X_11 AND X_6;
{龍回頭--主圖指標}
MA1:MA(CLOSE,5);
MA2:MA(CLOSE,10);
MA3:MA(CLOSE,20);
MA4:MA(CLOSE,30);
MA5:MA(CLOSE,60);
強勢線:MA(C,25)+MA(C,25)*20/100,LINETHICK2,COLORRED;
DM1:=C/REF(C,1)>1.09 AND C>=O;
DM2:=REF(C,4)<0.96 AND REF(C,2)/REF(C,3)<1.02 AND REF(C,1)/REF(C,2)<1.02;
DM3:=MAX(REF(C,1),REF(O,1))/MIN(REF(C,1),REF(O,1))<1.036 AND MAX(REF(C,2),REF(O,2))/MIN(REF(C,2),REF(O,2))<1.036
AND MAX(REF(C,3),REF(O,3))/MIN(REF(C,3),REF(O,3))<1.036;
DXGM:=COUNT(REF(DM1,1),10) AND DM2 AND DM3;
AM1:=C/REF(C,1)>1.09 AND C>=O;
AM2:=REF(C,3)<0.96 AND REF(C,2)/REF(C,3)<1.02 AND REF(C,1)/REF(C,2)<1.02;
AM3:=MAX(REF(C,1),REF(O,1))/MIN(REF(C,1),REF(O,1))<1.036 AND MAX(REF(C,2),REF(O,2))/MIN(REF(C,2),REF(O,2))<1.036;
AXGM:=COUNT(REF(AM1,1),10) AND AM2 AND AM3;
BM1:=C/REF(C,1)>1.09 AND C>=O;
BM2:=REF(C,2)<0.96;
BM3:=MAX(REF(C,1),REF(O,1))/MIN(REF(C,1),REF(O,1))<1.05;
BXGM:=COUNT(REF(BM1,1),10) AND BM2 AND BM3;
CM1:=C/REF(C,1)>1.09 AND C>=O;
CM2:=REF(C,1)<0.96;
CXGM:=COUNT(REF(CM1,1),10) AND CM2;
SGX:=MA(C,25)+MA(C,25)*20/100;
GYTJ1:=(BETWEEN(O/MA(C,10),1.02,0.99) OR BETWEEN(L/MA(C,10),1.04,0.99) OR (BETWEEN(L/SGX,1.01,0.995) AND SGX/MA(C,10)<1.08))AND C>MA(C,10)
AND BETWEEN(C/REF(C,1),1.05,0.97) AND MA(C,5)>MA(C,10) AND MA(C,5)/MA(C,10)>1.01 AND H/MAX(C,O)<1.04
AND C>MA(C,120)AND MA(C,20)>MA(C,60) AND MA(C,20)>MA(C,120) AND REF(L,1)/REF(MA(C,10),1)>0.998;
GYTJ2:=REF(C,1)MA(C,20) AND MA(C,20)>MA(C,30);
ABXG:=(DXGM OR AXGM OR BXGM OR CXGM) AND GYTJ1 AND GYTJ2;
DRAWICON(ABXG,L*0.98,11);
DRAWTEXT(ABXG,L*0.94,'龍回頭'),COLORWHITE;
SCMXG:=COUNT(ABXG,5) AND CROSS(MA(C,10),MA(C,5));
DRAWICON(SCMXG,L*0.98,9);
DRAWTEXT(SCMXG,L*0.94,'二次尾買'),COLORYELLOW;
{龍回頭--預警、選股、副圖指標}
DM1:=C/REF(C,1)>1.09 AND C>=O;
DM2:=REF(C,4)<0.96 AND REF(C,2)/REF(C,3)<1.02 AND REF(C,1)/REF(C,2)<1.02;
DM3:=MAX(REF(C,1),REF(O,1))/MIN(REF(C,1),REF(O,1))<1.036 AND MAX(REF(C,2),REF(O,2))/MIN(REF(C,2),REF(O,2))<1.036
AND MAX(REF(C,3),REF(O,3))/MIN(REF(C,3),REF(O,3))<1.036;
DXGM:=COUNT(REF(DM1,1),10) AND DM2 AND DM3;
AM1:=C/REF(C,1)>1.09 AND C>=O;
AM2:=REF(C,3)<0.96 AND REF(C,2)/REF(C,3)<1.02 AND REF(C,1)/REF(C,2)<1.02;
AM3:=MAX(REF(C,1),REF(O,1))/MIN(REF(C,1),REF(O,1))<1.036 AND MAX(REF(C,2),REF(O,2))/MIN(REF(C,2),REF(O,2))<1.036;
AXGM:=COUNT(REF(AM1,1),10) AND AM2 AND AM3;
BM1:=C/REF(C,1)>1.09 AND C>=O;
BM2:=REF(C,2)<0.96;
BM3:=MAX(REF(C,1),REF(O,1))/MIN(REF(C,1),REF(O,1))<1.05;
BXGM:=COUNT(REF(BM1,1),10) AND BM2 AND BM3;
CM1:=C/REF(C,1)>1.09 AND C>=O;
CM2:=REF(C,1)<0.96;
CXGM:=COUNT(REF(CM1,1),10) AND CM2;
SGX:=MA(C,25)+MA(C,25)*20/100;
GYTJ1:=(BETWEEN(O/MA(C,10),1.02,0.99) OR BETWEEN(L/MA(C,10),1.04,0.99) OR (BETWEEN(L/SGX,1.01,0.995) AND SGX/MA(C,10)<1.08))AND C>MA(C,10)
AND BETWEEN(C/REF(C,1),1.05,0.97) AND MA(C,5)>MA(C,10) AND MA(C,5)/MA(C,10)>1.01 AND H/MAX(C,O)<1.04
AND C>MA(C,120)AND MA(C,20)>MA(C,60) AND MA(C,20)>MA(C,120) AND REF(L,1)/REF(MA(C,10),1)>0.998;
GYTJ2:=REF(C,1)MA(C,20) AND MA(C,20)>MA(C,30);
ABXG:(DXGM OR AXGM OR BXGM OR CXGM) AND GYTJ1 AND GYTJ2;
評論前必須登錄!
立即登錄 注冊